Radwin 2000+ SERIES - Chapter 13: Software Upgrade

RADWIN2000+SeriesUserManual Release4.2.40 13‐1
Chapter13:SoftwareUpgrade
13.1ScopeofthisChapter
Thischapterdescribesthesoftwareupgradeutility,andhowandwhentouseit.
13.2WhatistheSoftwareUpgradeUtility?
TheRADWINManagerprovidesaSoftwareUpgradeUtility(SWU)toupgradethesoftware
(firmware)ofinstalledradiounitsinanetwork.Theupdatefilesmaybelocatedanywher e
accessiblebytheoperator.
TheSWUprovidesfor:
• Priorbackupofthecurrentfilespriortoupgrade
• Upgradefromalist
• Delayedupgrade
• Variousra
diounitresetoptions
Thedefaultlocationofthesoftwarefilesisintheinstallationarea,andcanbeusedtorestore
factorydefaults.
13.3UpgradinganInstalledLink
 Toupgradesoftwareforalink:
1. IntheRADWINManager,clicktheTools|SoftwareUpgradebutton.Thefollowing
detachedwindowappears: