Radwin 2000+ SERIES User Manual

RADWIN2000+SeriesUserManual Release4.2.40 7‐20
Management
Figure7‐10:ChangeLinkPassworddialogbox
2. Enterthecurrentlinkpassword(ThedefaultlinkpasswordforanewODUis
wireless‐p2mp).
IfyouhaveforgottentheLinkPassword,clicktheForgottenLinkPasswordbutton.
Thefollowingwindowisdisplayed:
Figure7‐11:LostorforgottenLinkPasswordrecovery
FollowtheinstructionstousetheAlternativeLinkPassword,andclickOKtofinish.
YouarereturnedtothewindowinFigure 7‐10above.Continuewiththenextstep.
3. Enteranewpassword.
4. RetypethenewpasswordintheConfirmfield.
5. ClickOK.
6. ClickYeswhenaskedifyouwanttochangethelinkpassword.
7. ClickOKatthePasswordchangedsuccessmessage.
• Alinkpasswordmustcontainatleasteightbutnomorethan16char‐
actersexcludingSPACE,TAB,andanyof“>#@|*?;.”
• RestoringFactoryDefaultsreturnstheLinkPasswordtowireless‐
p2mp.

Radwin 2000+ SERIES Specifications

General

Frequency Bands	5.4 GHz, 5.8 GHz
Channel Bandwidth	5 MHz, 10 MHz, 20 MHz
Encryption	AES-128
Interface	Ethernet
Operating Temperature	-30°C to +60°C
IP Rating	IP67