Radwin 2000+ SERIES - Figure 7-8 Default Snmp Log

RADWIN2000+SeriesUserManual Release4.2.40 7‐16
Management
Figure7‐8:DefaultSNMPlog‐ondialog
2. Intherighthandwindow,entertheusername(Vivaldi)andpassword.
3. ForaReadWriteprofileuser,youmaylogonasanyusertype(Observer,Operator,
Installer).Forexample,logonVivaldiasOperator.SinceVivaldibelongstotheRead
Writeprofile,inthelefthandwindow,useadminforthePasswordandleaveUser
Typeasis.(Ifnecessary,youcanusewirelessandInstaller,respectively.)
Inthemainwindowweseetheusernameinthetitlebar: