Radwin 2000+ SERIES - Sync Status Messages and Color Codes; Table 11-1 External Pulses

RADWIN2000+SeriesUserManual Release4.2.40 11‐11
SyncStatusMessagesandColorCodes
11.5SyncStatusMessagesandColorCodes
ThepossibleExternalPulsesconditionsareshowninthefollowingtable:
Table11‐1:ExternalPulseStatus
HSSSyncStatus Meaning
Color
code
Generating
RadiounitisHSSmasterandgeneratesthesyncpulse
Green
Detected
RadiounitisHSSclientanddetectsthesyncpulse
Notdetected
Radiounitisindependent(neitherHSSmasternorclient,
thiswouldbeappropriateforanRT‐B(HSU))
Generatingand
detected
RadiounitisHSSmaster,butotherHSSmasterispresent
Orange
Generatingand
Improperly
Detected
RadiounitisHSSmaster,butdetectsanHSSmastersignal
thatisnotRFPE.
Notdetected
RadiounitisHSSclient,butnoHSSmasterispresent
Improperly
detected
RadiounitisHSSclient,buttheHSSmasterpulsedoesn’tfit
theHSSclientasconfigured.OccursonlyforRADWIN2000
C+,RADWIN2000D+,andRADWIN5000,whichstop
transmitting.
Red