Radwin 2000+ SERIES - Figure 5-4 Extended Log - on; Figure 5-5 Log on Window

RADWIN2000+SeriesUserManual Release4.2.40 5‐6
OtherLog‐onOptions
Figure5‐4:Extendedlog‐onwindow
AttheUserTypefield,clickthelistbutton:
Figure5‐5:Logonwindowexposingtheusertypes.
Therearethreeusertypes:
• AnObserverhasread‐onlyaccesstothesector.AnObservercanmonitorthesector,
generatereports,butmaynotchangeanysectorparameters.
• AnOperatorcaninstall andconfigurethesector.
• AnInstallercan,inadditiontofunctioningasanOperator,alsochangetheoperating
frequencyband(orregulation).Thelatterfunctionhaslegalramifications,requiring
familiaritywithlocalregulations.
YoumaychoosetheSNMPversion.IfyourfirewallblocksSNMPv3messagesandfo
rsecurity
reasonscannotbechangedthemuseSNMPv1.TologonunderSNMPv3,clickSettingsfrom
theextendedlog‐onwindow: