Radwin 2000+ SERIES - Figure 21-1 Web Interface - Log on; Logging on; Some Working Tips

RADWIN2000+SeriesUserManual Release4.2.40 21‐3
SomeWorkingTips
21.7.3SomeWorkingTips
Youcan:
»LogontoaradiounitonthedefaultIPaddressof10.0.0.120/8,settheLinkIDandIP
addressinsteadofusingtheRADWINManagerasinRADWINManager.Unlikethe
LocalConnectionmethod,youneedtoresettheradiounittoseethechangeinthe
WebInterface.
» ChangetheoperatingBandforthelinkinsteadofusingtheRADWINManager.You
canrevertitthesamewa yorbyadirectconnection,loggedonasInstaller.
»LookatRecentEventsforeithersite
Youcannot:
» ChangedefaultTxPower
»ConfigureSpatialMultiplexing/Diversity
» ManageotherfeaturessuchasGSU(whensupported),VLAN,QoS
»PerformSoftwareupgrade
Beverycareful:
»UsingthistoolifyourlinkisprovidingCustomerServicewhichmaynotbeinterrupted
withsync‐losses
21.8Loggingon
TousetheWebinterface,simplypointyourbrowsertotheIPaddressofthesitetowhichyou
areconnected.
Figure21‐1:Webinterface‐Logon