RADWIN2000+SeriesUserManual Release4.2.40 4‐11
ToolsRequiredforInstallation
4.4ToolsRequiredforInstallation
ThefollowingisalistoftheequipmentandmaterialsrequiredtoinstallRADWIN2000+Series
hardware.
4.4.1ToolsandMaterials
• CrimpingtoolforRJ‐45(iftheODU‐PoEcableiswithoutconnectors)
• Spanner/wrench13mm(½”)
• Drill(forwallmountingonly)
• Cableties
• Sealingmaterial
• WaterproofingtapesuchasScotch23Tape¾”wide,from3MtoensureIP‐67compliant
protectionagainstwateranddust
4.4.2Cablesandconnectors
• ODUgroundingcable10AWG
• ODU‐PoEcable(outdoorclass,CAT‐5e,4twistedpairs,24AWG):
• Upto100m.for100BaseTconnection.
• Fora1000BaseTconnection(HBSonly)useanODU‐PoEcablenolongerthan75m.
• ExternalCAT‐5ecablediametershouldbebetween7‐9mmtoensur
ewaterproof
sealing.
4.5UnpackingandChecking
Foreachitem:
1. Removetheequipmentfromthebox.
2. CheckthateverythinglistedontheincludedBillofMaterialsorPro‐formaInvoiceis
present.
3. Ifanyitemismissing,contactCustomerService.Youwi ll beadvisedwhetherto
returnthepackageforreplacement,orwhetherthemissingitemcanbesupplied
separately.
4. Donotdisposeofthepackaginguntiltheunitisinstalledandoperational.
For1000BaseT,youshoulduseRADWINsuppliedODU‐PoEcables,which
guarantees1Gbperformance.RADWINcannotguarantee1Gb
performanceifyouusethirdpartycables.