Radwin 2000+ SERIES - Page 138

RADWIN2000+SeriesUserManual Release4.2.40 7‐25
Management
Ethernet
Figure7‐16:SettingEthernetservices
AgingTime
TheRT‐A(HBS)worksinBridgeMode.InBridgemodetheODUperformsbothlearning and
aging,forwardingonlyrelevantpacketsoverthesector.TheagingtimeoftheODUisby
default,300seconds.
EthernetPortsConfiguration
FortheRADWIN2000A+,RADWIN2000C+,andRA
DWIN2000D+,thePortwillappearas
LAN1.FortheRADWIN2000i,twoportswillappear:LAN1andLAN2(SFP),relatingtothe
portsonfrontpaneloftheunit.
TheEthernetportmodeisconfigurableforlinespeed(10/100/1000BaseT)andduplexmode
(halforfullduplex).
Linespe
ed1000BaseTisonlyavailableiftheODUisconnectedtoAGbEPoEdevice.
.