Ricoh LDD280 - 3.8.8 DRUM POSITION ADJUSTMENT

DRUM SECTION
C262/C265 3-72 SM
3.8.8 DRUM POSITION ADJUSTMENT
Purpose: To prevent the back edge of the master from coming 1.5 to 2.0 mm closer
on the non-operation side during printing, which causes the image to turn obliquely
on the paper.
C262R069.WMF
C262R070.WMF
Paper feeding
direction
Operation side
Non-operation side
1.5 to 2.0mm
Normal image
Abnormal image
Paper
Operation side
Non-operation side
[A]
[A]
[B]
[C]
[D]
The standard position
for the eccentric bushing