MASTER EJECT SECTION
C262/C265 3-24 SM
3.6.3 MASTER EJECT DRIVE UNIT, SENSORS AND MOTORS
• Rear Cover ( 3.2.2)
• PSU ( 3.5.1)
• Left scanner cover ( 3.2.3)
• Master eject box ( 3.6.1)
• Master eject roller unit ( 3.6.2)
[A]: Bracket ( x 1)
[B]: Master eject drive unit ( x 2, x 4)
NOTE:
1) To remove the master eject drive unit [B], slide it out towards the paper
delivery direction, and pull down the top of the unit towards the operation
panel. (See the arrows in the illustration.)
2) The master eject drive unit is connected to the cables from the sensor
and the motor. Remove the master eject drive unit carefully.
C262R024.WMF
[A]
[B]
To Next Page
Loading...
