Ricoh LDD280 - Master Set Mechanism

MASTER FEED
C262/C265 6-42 SM
6.6.2 MASTER SET MECHANISM
Master Roll Set
The master set sensor [A] checks to see if the master roll was installed properly.
Master Feed and Stop Control (Edge Detection)
After the master making unit is inserted, the master set sensor [A] detects the
leading edge of the master. The master is fed in reverse [B] until the master set
sensor turns off.
After that, the master is fed forwards, and the master edge sensor [C] checks the
leading edge of the master.
C262D032.WMF
C262D033.WMF
[A]
[A]
[E]
[C]
[B]
[D]