PAPER FEED SECTION
C262/C265 3-96 SM
3.9.15 TIMING BELT TENSION ADJUSTMENT FOR THE PAPER
FEED MOTOR
Purpose: To ensure smooth paper feed.
1. Make sure that the distance between the motor and the flange is 8.0 ± 0.5mm.
2. Apply a 500g load to the center of the belt using a tension gauge. Make sure
that the belt deflects between 2 to 4 mm. If the tension is incorrect, move the
motor up or down.
C262R095.WMF
2 to 4 mm
8.0 ± 0.5 mm
To Next Page
Loading...
