PAPER FEED
SM 6-81 C262/C265
Detailed
Descriptions
Paper Types
The user can select the paper type before starting the job. The feed and separation
pressures used for the job will depend on the selected paper type (the machine
automatically adjusts these pressures to suit the selected paper type).
The possible paper type settings are standard, thick, thin and special. Two
additional settings for paper types can be customized as 'user 1' and 'user 2'.
For the 'user 1' and 'user 2' paper types, the user can choose from six settings
using a user tool (System Settings – Mode Setting – Paper Type: User 1-2). The
user tool settings give the machine a rough idea of what type of paper the user is
using as types User 1 and User 2. The six user tool settings are as follows.
• Standard, no feed (Standard paper type, non feed likely)
• Standard, double feed (Standard paper type, double feed likely)
• Thick, no feed (Thick paper type, non feed likely)
• Thick, double feed (Thick paper type, double feed likely)
• Thick, medium (Thick paper type, with intermediate chances of double and non-
feed)
• Thin, very thin (Thin paper type, non feed likely)
Pressure Settings for Each Paper Type
For each of these paper types (standard, thick, thin, special, user 1, user 2), the
user has two settings: ‘Misfeed’ and ‘Double Feed’. Each of these two settings has
three possible values: Standard, Sometimes, Frequently (the user selects one of
these depending on how the machine is performing).
The pressures for each setting can be adjusted with SP mode (SP 6-9 ‘Misfeed –
Paper Feed Pressure’ and SP6-10 ‘Double feed – Separation Press’).
• SP 6-9 adjusts the feed pressures that are applied for each of the user’s three
possible ‘misfeed’ settings for each paper type.
• SP 6-10 adjusts the separation pressures that are applied for each of the user’s
three possible ‘double feed’ settings for each paper type.
To Next Page
Loading...
