INSTALLATION REQUIREMENTS
SM 1-1 C262/C265
Installation
1. INSTALLATION
1.1 INSTALLATION REQUIREMENTS
Carefully select the installation location because environmental conditions have a
great effect on machine performance.
1.1.1 OPTIMUM ENVIRONMENTAL CONDITION
1. Temperature ⎯10 to 30 °C (50 to 86 °F)
2. Humidity ⎯20 to 90 % RH
3. Install the machine on a strong and level base. The machine must be level
within 5 mm (0.2") both front to rear and left to right.
1.1.2 ENVIRONMENTS TO AVOID
1. Locations exposed to direct sunlight or strong light (more than 1,500 lux).
2. Dusty areas.
3. Areas containing corrosive gases.
4. Locations directly exposed to cool air from an air conditioner or reflected heat
from a space heater. (Sudden temperature changes from low to high or vice
versa may cause condensation within the machine.)
1.1.3 POWER CONNECTION
1. Securely connect the power cord to a power source.
2. Make sure that the wall outlet is near the machine and easily accessible.
3. Make sure the plug is firmly inserted in the outlet.
4. Avoid multi-wiring.
5. Do not pinch the power cord.
To Next Page
Loading...
