MAIN DRIVE AND IMAGE UP/DOWN SHIFTING DRIVE SECTION
C262/C265 3-122 SM
3.11.2 MAIN DRIVE MECHANISM (MAIN DRIVE TIMING BELT)
Disassembly Procedure
1. Turn off the main switch and disconnect the power plug. Then remove this part.
• Rear cover ( 3.2.2)
2. Swing out the ACU-ECU assembly and PSU ( 3.5.1).
3. Remove the double feed detector board [A], the motor cover [B] and the lifting
cam bracket [C].
4. Remove the registration roller lifting cam [D].
C262R142.WMF
[B]
[C]
[D]
[A]
To Next Page
Loading...
