MASTER EJECT
C262/C265 6-32 SM
6.5.4 MASTER EJECT BOX LOCK MECHANISM
In the ‘higher’ security mode, the master eject box [A] cannot be taken out. The
master eject box lock solenoid [B] pushes down the lever [C] and locks the master
eject box.
This type of solenoid (magnetic latching solenoid) stays in position when power is
turned off. Another pulse of power is necessary to return the solenoid to the initial
position. As a result, the box remains locked when power is switched off.
A sensor (not shown in this diagram) detects the status of the lock mechanism.
When the master is being ejected and compressed, the master eject box is locked
regardless of the setting of the security mode.
CAUTION: Do not try to take out the master eject box while the higher security
mode is on.
To select higher security mode, set User Tools – System Settings – Administrator
Tools – Security Option to ‘Higher’.
C262D123.WMF
[A]
[C]
[B]
To Next Page
Loading...
