INSTALLATION PROCEDURE
C262/C265 1-32 SM
1.2.8 IEEE 1284 PARALLEL BOARD TYPE 1 (OPTION)
Accessory Check
Check the quantity and condition of the accessories in the box against this list:
Description Quantity
1. Parallel board................................................................................. 1
2. Parallel cable ................................................................................. 1
Installation Procedure
You can only install one of these two cards, because only one slot (slot A) is
available for these options:
• IEEE 802.11b I/F Unit Type 1
• IEEE 1284 Parallel Board Type 1
If a different card is installed in slot A, you must remove it before you install the
IEEE 1284 Parallel Board Type 1.
1. Turn the machine off.
2. Remove the slot cover [A] ( x 2).
3. Install the IEEE1284 board [B] into slot A and secure it with the screws ( x 2).
4. Attach the parallel cable [C].
5. Turn the machine on and print a configuration page to make sure that the
machine can see the “IEEE 1284”:
User Tools> Online Printer Features> List/Test Print> Configuration Page
C262I031.WMFF
[A]
[B]
[C]
To Next Page
Loading...
