MAIN DRIVE AND IMAGE UP/DOWN SHIFTING DRIVE SECTION
C262/C265 3-146 SM
3.11.8 IMAGE SHIFT GEAR PRESSURE ADJUSTMENT
Purpose: To remove play while using the image gear, and to make sure that the
image shift gear moves smoothly along the drum drive gear.
1. Turn off the main switch and disconnect the power plug. Then remove these
parts.
• Drum unit ( 3.8.1)
• Rear cover ( 3.2.2)
2. Swing out the ACU-ECU assembly and PSU ( 3.5.1).
3. Remove the supporter for the ACU-ECU assembly and PSU [A] ( x 4).
4. Remove the image shifting unit [B] ( x 3, x 2).
C262R193.WMF
C262R145.WMF
[A]
[B]
To Next Page
Loading...
