PAPER DELIVERY SECTION
SM 3-153 C262/C265
Replacement
Adjustment
3.12.5 GAP ADJUSTMENT BETWEEN PAPER PICK-OFF PLATE
AND PRESSURE CYLINDER
Purpose: To ensure smooth paper feed to the paper delivery unit.
• Drum unit ( 3.8.1)
• Master eject box ( 3.6.1)
• Left cover ( 3.2.2)
• Knob cover ( 3.2.1)
1. Apply the printing pressure as follows, to push the pressure cylinder up to the
printing position.
1) Access SP5-64-2, and select “Start” for the printing pressure release
solenoid.
2) Turn the knob [A] until the flat part of the cylinder [B] is turned by
approximately 120º (the starting position is with the flat part at the top).
3) Leave SP mode.
C262R098.WMF
[A]
[B]
To Next Page
Loading...
