SERVICE PROGRAM MODE
C262/C265 5-10 SM
5.4.3 SERVICE PROGRAM TABLE
Main Menu Number List
No. Menu Description
1
Data Logging
Various counters and logged data
2
Basic Settings
Various settings
3
System Settings
Settings used at installation
4
Input Test Mode
Sensor on/off status check
5
Output Test Mode
Motors and other components on/off check
6
System Adjustment
Various adjustments
7
Memory Data Clear
Resets or clears the SP mode data
8
System Test
Various data printouts and system tests
9
Printer Controller
Controller data print out and System tests
NOTE:
1) In this model, the User Tool settings cannot be accessed with SP mode.
2) The SP mode items for the optional units (such as the LCS) do not
appear when the unit is not installed (e.g. SP 1-19).
To Next Page
Loading...
