PAPER DELIVERY SECTION
C262/C265 3-156 SM
3.12.7 GAP ADJUSTMENT BETWEEN EXIT PAWL AND DRUM
Purpose: To ensure that the paper is delivered without paper wrap or damage.
1. Turn the main drive manually, so that the bearing [A] of the exit pawl arm rides
on the low point of the cam.
NOTE: Use the main drive rotation knob to turn the main drive.
2. By moving the adjusting plate [B], adjust the clearance [C] between the drum
and the top of the exit pawl until it is 1 ± 0.5 mm.
C262R125.WMF
[A]
[B]
[C]
To Next Page
Loading...
