DRUM
C262/C265 6-62 SM
Color Drum ID Detection
With dip switches and SP settings, the print counters for each color can be defined,
and the color of the drum in the machine can be checked with a network utility.
When the drum type detection dip switch on the ink detection board [A] is set to
‘color drum’ (DIPSW 901-1 is off and 901-2 is on), then you can set the DPS902
dip switches [B] to specify the ID of the color.
The connecter [C] is for color drum ID detection and ink flow detection.
Four color IDs can be recognized. Note that this is not possible for A4 drums.
DPS902 -1 -2
ID0 OFF OFF
ID1 ON OFF
ID2 OFF ON
ID3 ON ON
ON
OFF
C262D053A.WMF
ON
OFF
C262D054A.WMF
[A]
[B]
[C]
To Next Page
Loading...
