PAPER FEED
SM 6-87 C262/C265
Detailed
Descriptions
6.8.6 PAPER FEED RETRY MECHANISM
When paper is misfed at the paper feed tray, a paper feed jam is not displayed,
and the machine tries to feed the paper again.
The paper registration sensor does not turn on after the paper feed motor turns,
and the pressure cylinder turns without paper. Then, when the feed start sensor is
on again, the paper feed motor starts to feed again.
The paper feed retry mechanism only operates during printing, and not for the trial
print.
The retry is done only one time. If paper is not fed, then a misfeed occurs.
Paper feed retry m echanism
1st drum position sensor
Feed start sensor
Registration Sensor
Paper Feed Motor
Registration Motor
SP6-030
Paper feed jam check
184 degrees
SP6-030
Paper feed jam check
184 degrees
First try: When the registration sensor does not turn on, the paper feed motor will
stop. Then ‘A jam’ will not display and the drum will be rotated without pressure.
Second try: When the registration sensor turns on, the machine feeds the paper
normally. But, if the registration sensor again does not turn on, ‘A jam’ will display
To Next Page
Loading...
