MASTER FEED
C262/C265 6-50 SM
Master Feed Control Roller Mechanism
The master feed control roller [A] is driven by the master feed control motor [B] as
shown. The master feed control roller turns in the following cases:
• When a master roll is put in the machine, the master is fed until the master feed
control roller catches the leading edge of the master.
• During master clamping, the master feed control roller turns and sends the
leading edge to the clamper position.
• While the master is being wrapped around the drum, the master feed control
roller turns to feed the master, in synchronization with the drum rotation.
C262D042.WMF
[A]
[B]
Front
Rear
To Next Page
Loading...
