MECHANISM OVERVIEW
C262/C265 6-10 SM
Index No. Name Function
107 Platen Release Sensor
Detects when the platen pressure is applied
against the thermal head.
109 Master Amount Sensor
Detects the speed of rotation of the master roll, to
determine the length of master that remains on the
roll.
112 Master Duct Sensor
Detects when a master remains in the master
buffer duct.
115
Master Making Unit Lock
Sensor
Detects the status of the master making unit lock
mechanism.
117 Master Edge Sensor
Detects the leading edge of the master when a
new master roll in installed.
118 Master End Sensor Detects when the master runs out.
119 Master Set Sensor Detects whether a master roll is present.
Solenoids
Index No. Name Function
77
Printing Pressure
Release Solenoid
There are two solenoids: one at the front and one
at the rear. They pull the release arms to apply the
printing pressure against the drum.
86
Master Eject Box Lock
Solenoid
Locks the master eject box, so that old masters
cannot be removed. This security feature can be
cancelled only by the machine’s administrator.
113 Duct Entrance Solenoid
Opens or close the plate at the entrance of the
master buffer duct.
114
Master Making Unit Lock
Solenoid
Locks the master making unit in position during
printing, so that the user cannot accidentally
remove it at the incorrect time.
Others
Index No. Name Function
9
Exposure Lamp (Xenon
Lamp)
Applies lights to the original for exposure.
45 Print Counters Keeps track of the total number of copies.
46 Master Counters Keeps track of the total number of masters made.
47
Drum Home Position
Indicator (LEDs)
LEDs that indicates the drum position.
54 Thermistor
Detects the temperature inside the drum to adjust
various processes.
55 Ink Detection Pin Detects if ink is present in the drum.
106 Thermal Head Burns the image of the original onto the master.
To Next Page
Loading...
