INSTALLATION PROCEDURE
SM 1-31 C262/C265
Installation
1.2.7 IEEE 802.11B I/F UNIT TYPE 1 (OPTION)
Accessory Check
Check the quantity and condition of the accessories in the box against this list:
Description Quantity
1. LAN board...................................................................................... 1
2. LAN card........................................................................................ 1
3. LAN card cap ................................................................................. 1
Installation Procedure
You can only install one of these two cards, because only one slot (slot A) is
available for these options:
• IEEE 802.11b I/F Unit Type 1
• IEEE 1284 Parallel Board Type 1
If a different card is installed in slot A, you must remove it before you install the
IEEE 802.11b I/F Unit Type 1.
1. Turn the machine off.
2. Remove the slot cover [A] ( x 2).
3. Install the LAN board [B] into slot A and secure it with the screws ( x 2).
4. Insert the LAN card [C] in the slot.
5. Attach the LAN card cap [D].
6. Turn the machine on and print a configuration page to make sure that the
machine can see the “IEEE 802.11b” ( 1.2.10):
User Tools> Online Printer Features> List/Test Print> Configuration Page
C262I030.WMFF
[A]
[B]
[C]
[D]
To Next Page
Loading...
