Ricoh LDD280 - Master Making Unit Lock Mechanism

MASTER FEED
SM 6-55 C262/C265
Detailed
Descriptions
6.6.5 MASTER MAKING UNIT SET MECHANISM
Master Making Unit Slide-out Mechanism
The master making unit can be slid out along the guide rails.
There are one drawer connector [B] and two cable connectors [C]
The master making unit set sensor [A] (a push switch) detects when the unit is out.
The operation panel displays a message in this case.
Master Making Unit Lock Mechanism
During master making or master feeding, the master making unit lock solenoid [D]
moves the lock [E] and holds a pin [F] on the master making unit.
The master making unit lock detector [G] detects when the mechanism is locked.
This mechanism prevents the user from pulling out the master making unit during
master making or master feeding.
C262D100A.WMF
C262D045.WMF
[D]
[F]
[E]
[G]
[A]
[B]
[C]