PRINTING AND PRESSURE CYLINDER
SM 6-105 C262/C265
Detailed
Descriptions
6.9.6 PAPER RELEASE PAWLS MECHANISM
The paper is released shortly after the leading edge passes through the nip
between the drum and pressure cylinder where the image is transferred to the
paper, and it is fed towards the paper delivery unit.
As the pressure cylinder rotates, the other high point of the cam [B] reaches the
bearing at the front end of the clamper. The clamper is again opened and the paper
is released.
The opening angle of the clamper for releasing is larger than for clamping, and this
causes the paper release pawls [A] to rise to push the clamped edge of the paper,
which helps the release mechanism.
C262D101.WMF
[A]
[B]
Front
Rear
To Next Page
Loading...
