Ricoh LDD280 - 3.10.3 1 ST DRUM MASTER SENSOR

PRINTING SECTION
C262/C265 3-110 SM
3.10.3 1
ST
DRUM MASTER SENSOR
• Drum unit ( 3.8.1)
• 1
st
drum master sensor bracket ( 3.10.1)
[A]: 1
st
drum master sensor guide ( x 4)
NOTE: Before you remove the bracket, make a mark on the screw and the
bracket. This will show you how much to tighten the screw before you
do the 1
st
drum master sensor guide adjustment.
After you re-install the 1
st
drum sensor guide, do the 1
st
drum master
sensor guide adjustment ( 3.10.4)
[B]: 1
st
drum master sensor ( x 1,  x 1)
NOTE: Do the 1
st
drum master sensor adjustment ( 3.8.9) after installing the
new 1
st
drum master sensor.
C262R127.WMF
[A]
[B]