MASTER EJECT
SM 6-31 C262/C265
Detailed
Descriptions
The ejected masters in the box can be taken out by sliding the eject lever [A]. The
inner bottom case [C] moves towards the rear of the box.
Masters are ejected from an open door at the rear of the box. The side opposite the
eject lever side [A] of the inner bottom case is connected to a belt [B]. This helps
the inner bottom case move smoothly.
When the master eject box is removed, a push switch (the eject box set sensor)
turns off, and the operation panel displays a message.
C262D021.WMF
[A]
[B][C]
To Next Page
Loading...
