MAIN DRIVE AND IMAGE UP/DOWN SHIFTING DRIVE SECTION
C262/C265 3-140 SM
3. From the operation side of the machine, insert the positioning shafts [D]
(special tools) to secure the pressure cylinder and printing pressure cams in the
their home positions.
z Pass one shaft through the pressure cylinder as shown.
z Pass the other shaft through the two printing pressure cams as shown.
4. Swing out the ACU-ECU assembly and PSU ( 3.5.1).
5. Remove the supporter for the ACU-ECU assembly and PSU [E] ( x 4).
C262R138.WMF
C262R193.WMF
[D]
[E]
To Next Page
Loading...
