GENERAL SPECIFICATIONS
SM 7-3 C262/C265
Specifications
Copying 120 rpm: 79 dB 64 dB
Copying 135 rpm: 81 dB 68 dB
Dimensions
(W x D x H)
Table Closed: 750 x 705 x 1020mm (29.5 x 27.6 x 44.5”)
Table Opened: 1420 x 705 x 1130mm (55.9 x 27.6 x
40.2”)
Measurement Conditions
1) With the ADF
2) With the table
Weight: With Platen: 103.5kg (228.2 lb)
With ADF: 110.5kg (243.6 lb)
Master Process Time: C262
ADF: Not more than 25 seconds (A4 copying)
Not more than 33 seconds (A3 copying)
Platen: Not more than 20 seconds (A4 copying)
Not more than 28 seconds (A3 copying)
C265
ADF: Not more than 17 seconds (A4 copying)
Not more than 20 seconds (A3 copying)
Platen: Not more than 12.2 seconds (A4 copying)
Not more than 16 seconds (A3 copying)
Paper Table Capacity: 1,000 sheets (55kg / 64 g/m
2
/ 20 lb)
Paper Delivery Table
Capacity:
1,000 sheets (55kg / 64 g/m
2
/ 17 lb)
1,000 sheets (20lb paper)
Leading Edge Margin: Less than 5mm
Trailing Edge Margin: 2 mm
Side Registration
Adjustable Range:
± 10 mm
*Width more than 308mm: ± 5 mm
Minimum movable unit: 0.25mm
Vertical Registration
Adjustable Range:
± 15 mm
Minimum movable unit: 0.25mm
Master Type: Thermal master roll type:
320 mm width, 110 m/roll
Yield:
200 masters/roll (A3 Drum)
190 master/roll (DLT Drum)
320 masters/roll (A4 Drum)
Maximum run length per master:
4,000 prints
To Next Page
Loading...
