INSTALLATION PROCEDURE
SM 1-7 C262/C265
Installation
3. When you install the optional table, mount the machine on the table, as shown.
(2 screws [B] packed with the table).
CAUTION
Only handle with the carrying handles [A] on the bottom of the machine.
Otherwise, your fingers may be pinched between the main body and the
table during installation. (The gap between the bottom of the main body
and the table is very small.)
Be sure to attach screws [B], or static electricity will build up inside the
machine.
C262I004.WMFF
[A]
[B]
To Next Page
Loading...
