INSTALLATION PROCEDURE
SM 1-13 C262/C265
Installation
11. Pull out the master making unit [A] until it stops.
12. Push the button [B], and open the master guide [C].
13. Open the master tray cover [D].
14. The master roll [E] must be positioned as shown in the illustration.
15. Close the master tray cover [D].
16. Insert the master roll [F].
NOTE: Make sure the leading edge reaches the interior [G] of the master
holder.
C262I032.WMFF
C262I033.WMFF
C262I034.WMFF
[A] [B]
[C]
[D]
[E]
[F]
[G]
Correct
Not
Correct
To Next Page
Loading...
