021 Paper Tray1: Plain: 1200 *ENG
[–9 to 5 / 0 / 1 mm/step]
022 Tray1: Middle Thick: 1200 *ENG
023 Tray 2/3/4/5LCT: Plain: 1200 *ENG
024 Tray 2/3/4/5LCT: Mid: 1200 *ENG
025 By-pass: Plain: 1200 *ENG
026 By-pass: Middle Thick: 1200 *ENG
027 Paper Tray1: Thick1: 1200 *ENG
[–9 to 5 / -2 / 1 mm/step]028
Paper Tray2/3/4/5/LCT: Thick
1:1200
*ENG
029 By-pass: Thick 1: 1200 *ENG
030 Duplex: Plain: 1200 *ENG
[–9 to 5 / 0 / 1 mm/step]
031 Duplex: Middle Thick: 1200 *ENG
032 Duplex: Thick 1: 1200 *ENG [–9 to 5 / -2 / 1 mm/step]
1007 [By-Pass Size Detection] By-Pass Size Detection Display
001
LG *ENG
[0 or 1 / 0 / 1 ]
0: Disable, 1: Enable
Enables or disables the automatic paper size detection function of the by-pass tray.
This SP determines what paper size the machine detects if the detected size is less than 8.5”.
0: OFF (Letter/SEF), 1: ON (Legal/SEF)
1101 [Flicker Control]
001
Flicker Control *ENG [0 or 1 / 0 / 1 /step]
-
1103 [Fusing Idling] Fusing Idling Adjustment
011 Idling Start Temp. *ENG [0 to 75 / 75 / 1 deg/step]
012 Forced Idling Stop *ENG [0 to 1 / 0 / 1 /step]
8. Appendix: SP Mode Tables
148
To Next Page
Loading...
Need help?
General
