Roland SonicCell - Tone Copy; Patch Initialize

115
Using the SonicCell in Patch Mode
This operation copies tone settings from a patch to one of the
tones in the currently selected patch.
From the Patch Edit menu screen (p. 88), select “Tone Copy.”
The Patch Tone Copy screen will appear.
1. Select the copy-source tone and copy-destination tone.
* The copy-destination patch is the patch that’s selected in
the temporary area (p. 57).
2. Move the cursor to “COPY” and press [CURSOR/VALUE].
A confirmation message will appear.
3. To execute the copy, select “OK” and press [CURSOR/
VALUE].
If you decide not to execute the copy, select “CANCEL”
and press [CURSOR/VALUE].
Once the copy has been completed, you’ll be returned to
the previous screen.
Returns the current patch settings to their initial values.
From the Patch Edit menu screen (p. 88), select “Patch Init.”
A confirmation message will appear.
1. To execute the initialization, select “OK” and press
[CURSOR/VALUE].
If you decide not to initialize, select “CANCEL” and press
[CURSOR/VALUE].
When initialization is finished, you’ll be returned to the
previous screen.
Tone Copy
Parameter
(1)
Group of the copy-source patch
(2) Copy-source patch
(3) Copy-source tone
(4) Copy-destination tone
(
1
)
(
3
)(
2
)
(
4
)
Patch Initialize
SonicCell_e.book 115 ページ ２００７年８月９日 木曜日 午後９時１７分