134
Using the SonicCell in Patch Mode
■
MFX screen ..................................................................................................................
Selecting the item to edit (Effect Routing screen)
Parameter
Explanation
Tone (Tone Output)
* Patch Type: Patch
Edits output-related settings for the patch/tone.
By moving the cursor to and pressing [CURSOR/VALUE] you can move to the Patch Output
screen (p. 108).
Key (Rhythm Output)
* Patch Type: Rhythm
Edits output-related settings for the rhythm set/rhythm tone.
By moving the cursor to and pressing [CURSOR/VALUE] you can move to the Rhythm Output
screen (p. 129).
MFX
Edits multi-effect settings.
Press [CURSOR/VALUE] to access the MFX screen (p. 134).
MFX
(MFX Output)
Edits settings for the multi-effect output.
By moving the cursor to and pressing [CURSOR/VALUE] you can move to the MFX Output
screen (p. 135).
CHO
(Chorus)
Edits chorus settings.
Press [CURSOR/VALUE] to access the Chorus screen (p. 135).
CHO
(Chorus Output)
Edits settings for the chorus output.
By moving the cursor to and pressing [CURSOR/VALUE] you can move to the Chorus Output
screen (p. 135).
REV
(Reverb)
Edits reverb settings.
Press [CURSOR/VALUE] to access the Reverb screen (p. 136).
REV
(Reverb Output)
Edits settings for the reverb output.
By moving the cursor to and pressing [CURSOR/VALUE] you can move to the Reverb Output
screen (p. 136).
M
(Mastering Effect)
Edits mastering effect settings.
Press [CURSOR/VALUE] to access the Mastering Effect screen (p. 181).
Multi-effect settings (MFX/MFX Output screen)
Parameter
Value Explanation
00: THRU–78: SYMRESONANCE
(MFX Type)
Selects the type of multi-effect used by MFX.
Choose “00: THRU” if you don’t want to apply a multi-effect.
Parameters for each MFX type
Edit the parameters for the selected MFX type.
Refer to “Multi-Effects Parameter (MFX1–3, MFX)” (p. 192).
SonicCell_e.book 134 ページ ２００７年８月９日 木曜日 午後９時１７分
To Next Page
Loading...
Need help?
General
