Roland SonicCell - Editing the Multi-Effects Related Settings (MFX1-3;MFX1-3 Output Screens); Chorus-Related Settings (Chorus;Chorus Output Screen)

78
Using the SonicCell in Performance Mode
■ MFX1–3 screens ...........................................................................................................
■ MFX1–3 Output screens................................................................................................
■ Chorus screen...............................................................................................................
Editing the multi-effects related settings (MFX1–3/MFX1–3 Output screens)
Parameter
Value Explanation
00: THRU–78: SYMRESONANCE
(MFX Type)
Selects the types of multi-effects that MFX1--MFX3 will use.
Choose “00: THRU” if you don’t want to apply a multi-effect.
Parameters for each MFX type
Edit the parameters for the selected MFX type.
Refer to “Multi-Effects Parameter (MFX1–3, MFX)” (p. 192).
Parameter
Value Explanation
Output Level
0–127
Adjusts the volume of the sound that has passed through the multi-effects.
If you're applying a multi-effect, this specifies the depth of the multi-effect. If you're
not applying a multi-effect, this specifies the volume of the original sound.
Chorus Send Level 0–127
Adjusts the amount of chorus for the sound that passes through multi-effects. If you
don’t want to add the Chorus effect, set it to “0.’
Reverb Send Level 0–127
Adjusts the amount of reverb for the sound that passes through multi-effects. If you
don’t want to add the Reverb effect, set it to “0.”
Chorus-related settings (Chorus/Chorus Output screen)
Parameter
Value Explanation
00: OFF–03: GM2 CHORUS
(Chorus Type)
Selects the types of chorus.
Choose “00: OFF” if you don’t want to apply a chorus.
Parameters for each chorus type
Edit the parameters for the selected chorus type.
Refer to “Chorus Parameters” (p. 219).
SonicCell_e.book 78 ページ ２００７年８月９日 木曜日 午後９時１７分