84
Using the SonicCell in Patch Mode
1.
Press [MIDI INST] so its indicator is lit.
The Patch Play screen will appear.
If the Sound Mode is set to “Performance,” the MIDI INST screen (p. 58) will appear.
2.
Press [MENU].
The Patch Menu screen will appear.
The Patch Menu screen is structured as shown in the
illustration at right. You can switch between screens
by turning [CURSOR/VALUE] to the right or left.
3.
Turn [CURSOR/VALUE] to move the cursor to the
parameter you want to edit.
4.
Press [CURSOR/VALUE] to access the corresponding screen.
This specifies the mode of the MIDI sound module.
The current mode is highlighted.
1.
Turn [CURSOR/VALUE] to move the cursor, and press
[CURSOR/VALUE] to specify the mode.
If you select “Patch” and press [CURSOR/VALUE], one of
the following screens will appear depending on the Patch
type setting (p. 82, p. 83).
If you select “Performance” and press [CURSOR/VALUE],
the following screen will appear.
Viewing the menu screen (Patch Menu screen)
Parameter
Explanation
Tone Switch 1–4
Used to specify whether tones 1–4 will be used (ON) or not used (OFF).
Snd (Sound) Mode
Lets you switch between Patch mode and Performance mode.
Press [CURSOR/VALUE] to access the Sound Mode screen.
Patch Init
(Patch Initialize)
Initializes the settings of the current patch (p. 115).
Write
(Patch Write)
Saves the current patch as user data.
Press [CURSOR/VALUE] to access the Patch Name screen (p. 116).
System
Press [CURSOR/VALUE] to access the System screen (p. 176).
Utility
Press [CURSOR/VALUE] to access the Utility screen (p. 182).
Demo Play
When you press [CURSOR/VALUE], the demo song list will appear.
* For details on how to play the demo songs, refer to p. 15 and p. 168.
SRX Info
(SRX Information)
Press [CURSOR/VALUE] to access the System SRX Info screen (p. 180).
Version
(Version Information)
Press [CURSOR/VALUE] to access the System Version Info screen (p. 180).
Switching the sound mode (Sound Mode screen)
SonicCell_e.book 84 ページ ２００７年８月９日 木曜日 午後９時１７分
To Next Page
Loading...
