Roland SonicCell - Creating a Playlist; Performing via MIDI while a Song Plays

USER‘S GUIDE
30
You can use the included “SonicCell Playlist Editor” to create a playlist for playback by the SonicCell.
If you want to use the SonicCell to play backing tracks, it’s convenient to create a playlist in the order you
want the songs to play.
For details on installing “SonicCell Playlist Editor,” refer to p. 31 .
For details on using the software, refer to the PDF manual that is installed along with the software.
screen-playlisteditor.eps
■ Connections
fig.setsuzoku-pbm-MIDI.epsfig.setsuzoku-pds10.eps
PDS-10 BKT-S
Creating a Playlist
Performing via MIDI while a Song Plays
*If you use the PDS-10,
spread the tripod to the
maximum extent.
Ensure that the total
height including the
SonicCell does not
exceed one meter.
By using the separately
available PDS-10 and
BKT-S, you can set up the
SonicCell as shown in the
illustration.
USB
MEMORY
MIDI Keyboard
MIDI IN
OUTPUT
MIDI OUT
Monitor Amplifier etc.
SonicCell_e.book 30 ページ ２００７年８月９日 木曜日 午後９時１７分