Roland SonicCell User Manual

75
Using the SonicCell in Performance Mode
In Performance mode you can use three multi-effects (MFX1, MFX2, MFX3), one chorus, and one reverb. For each of the three multi-
effects, the chorus, and the reverb, you can specify whether it will operate according to the effect settings of the performance, or
according to the effect settings of the patch or rhythm set assigned to the part you specify.
The three multi-effects can be used independently, or you can connect two or three of them in series.
■ Signal flow...................................................................................................................
Editing effects
–
Make these settings in the Part Edit screen.
: Output Level, : Chorus Send, : Reverb Send, : Output Assign, : Output MFX
p. 69
Make these settings in the MFX1–MFX3 screens.
• Select the multi-effect type and edit the parameters.
p. 78
–
Make these settings in the MFX1–MFX3 Output screens.
: Output Level, : Chorus Send Level, : Reverb Send Level
p. 78
Make these settings in the Chorus screen.
• Select the chorus type and edit the parameters.
p. 78
–
Make these settings in the Chorus Output screen.
: Output Level, : Output Select
p. 79
Make these settings in the Reverb screen.
• Select the reverb type and edit the parameters.
p. 79
Make these settings in the Reverb Output screen.
• Output Level
p. 79
Patch
(Rhythm)
Patch (Rhythm)
Output
Part 1
Part 2
Part 3
Part 16
Chorus Output
Reverb
Output
Chorus
Mastering
Effect
OUTPUT
Reverb
1
2
3
4
5
MFX1
10
11
12
13
14
6
MAIN
REV
MFX Output
7
8
9
7
8
9
7
8
9
MFX2
MFX3
6
6
LR
1 2
4 5
3
66
8 97
10 11
12
13 14
1 5
1
2 3 4 5
6
7 9
7 8 9
10
11 12
11 12
13
14
SonicCell_e.book 75 ページ ２００７年８月９日 木曜日 午後９時１７分

Roland SonicCell Specifications

General

Brand	Roland
Model	SonicCell
Category	Computer Hardware
Language	English