74
Using the SonicCell in Performance Mode
5.
Turn [CURSOR/VALUE] to select the save-destination
performance, then press [CURSOR/VALUE].
A confirmation message will appear.
6.
To write the performance into memory, select “OK” and
press [CURSOR/VALUE].
If you decide you don’t want to carry out the write, select
“CANCEL” and press [CURSOR/VALUE].
Once the data has been written, you’ll be returned to the
previous screen.
SonicCell_e.book 74 ページ ２００７年８月９日 木曜日 午後９時１７分
To Next Page
Loading...
