Roland SonicCell User Manual

148
Input/output and effect settings (In/Out Routing)
■ Input FX Output screen .................................................................................................
Parameter
Value Explanation
Output Level
0–127
Set the level of the signal that is sent to the OUTPUT.
Chorus Send Level 0–127
Adjusts the amount of chorus for the sound.
If you don’t want to add the Chorus effect, set it to “0.”
Reverb Send Level 0–127
Adjusts the amount of reverb for the sound.
If you don’t want to add the Reverb effect, set it to “0.”
Selecting the signal sent to your computer (To Computer screen)
Parameter
Value Explanation
Type
MIX, Input FX
Selects the signal sent to your computer.
MIX: The signals of the internal tone generator and external input
(USB audio, INPUT) will be sent.
Input FX: The external input signal (USB audio, INPUT) unprocessed
by the chorus/reverb/mastering effects will be sent.
*1 If you’re in Patch mode, this will be only MFX.
OUTPUT
Computer
USB
Audio
INPUT
Input
Effect
MFX1
MFX3
MFX2
Chorus
Mastering
Reverb
*1
Tone
Generator
(TG)
OUTPUT
Computer
USB
Audio
INPUT
Input
Effect
MFX1
MFX3
MFX2
Chorus
Mastering
Reverb
*1
Tone
Generator
(TG)
SonicCell_e.book 148 ページ ２００７年８月９日 木曜日 午後９時１７分

Roland SonicCell Specifications

General

Brand	Roland
Model	SonicCell
Category	Computer Hardware
Language	English