Roland SonicCell - Using the Editor and Librarian

Using the SonicCell as a MIDI Sound Module
27
■ USER’S GUIDE
Press [CURSOR/VALUE].
fig.disp-MFX.eps
The MFX screen will appear.
Use [CURSOR/VALUE] to select the MFX type.
Press [CURSOR/VALUE].
The MFX type indication will be highlighted.
Use [CURSOR/VALUE] to change the MFX type.
Press [CURSOR/VALUE].
If you press [EXIT] you’ll return to the preceding screen.
For details on effect editing, refer to p. 132 .
If you want to save the patch you modified, refer to p. 116 .
Connections
fig.setsuzoku-MIDI-editor.eps
Dedicated editor and librarian software is included with the SonicCell.
By using the editor you can edit the SonicCell’s performance and patch parameters on your computer.
You can edit the settings while viewing them in the large screen of your computer.
By using the librarian you can manage the edited settings on your computer.
For details on installing the software, refer to p. 31 .
For details on using the software, refer to the PDF manual that is installed along with the software.
3
MFX Type
4
5
6
7
MEMO
Using the Editor and Librarian
To USB Connector
of Computer
USB COMPUTER
USB cable
Computer
SonicCell_e.book 27 ページ ２００７年８月９日 木曜日 午後９時１７分