135
Using the SonicCell in Patch Mode
■
MFX Output screen .......................................................................................................
■
Chorus screen...............................................................................................................
■
Chorus Output screen ...................................................................................................
Parameter
Value Explanation
Output Level
0–127
Adjusts the volume of the sound that has passed through the multi-effects.
If you’re applying a multi-effect, this specifies the depth of the multi-effect.
If you’re not applying a multi-effect, this specifies the volume of the original
sound.
Chorus Send Level
0–127
Adjusts the amount of chorus for the sound that passes through multi-effects.
If you don’t want to add the Chorus effect, set it to “0.’
Reverb Send Level
0–127
Adjusts the amount of reverb for the sound that passes through multi-effects.
If you don’t want to add the Reverb effect, set it to “0.”
Chorus settings (Chorus/Chorus Output screens)
Parameter
Value Explanation
00: OFF–03: GM2 CHORUS
(Chorus Type)
Selects the types of chorus.
Choose “00: OFF” if you don’t want to apply a chorus.
Parameters for each chorus type
Edit the parameters for the selected chorus type.
Refer to “Chorus Parameters” (p. 219).
Parameter
Value Explanation
Output Level
0–127
Adjusts the volume of the sound that has passed through chorus.
Output Select
MAIN, REV, M+R
Specifies how the sound routed through chorus will be output.
MAIN:
Output to the OUTPUT jacks in stereo.
REV:
Output to reverb in mono.
M+R:
Output to the OUTPUT jacks in stereo, and to reverb in mono.
SonicCell_e.book 135 ページ ２００７年８月９日 木曜日 午後９時１７分
To Next Page
Loading...
Need help?
General
