Roland SonicCell - Modifying the Sound (editing a patch)

USER‘S GUIDE
24
Example: Selecting “037 Violin” from the “PR-C” group
fig.dispPtchSlct01.eps
In the Patch Play screen, turn [CURSOR/VALUE] to move the
cursor to the patch group.
Press [CURSOR/VALUE].
fig.dispPtchSlct02.eps
Turn [CURSOR/VALUE] to select “PR-C,” then press [CURSOR/
VALUE].
fig.dispPtchSlct03.eps
Turn [CURSOR/VALUE] to move the cursor to the patch num-
ber, then press [CURSOR/VALUE].
The patch number will be highlighted.
Turn [CURSOR/VALUE] to select “037” as the patch number.
“Violin” will be selected.
Before you continue, select “037 Violin” from “PR-C” as described in the procedure above.
■ Editing the Amp Envelope
This specifies how the sound begins and decays.
Access the Patch Edit Screen
fig.dispPtchPly-Edithanten.eps
In the Patch Play screen, use [CURSOR/VALUE] to move the cor-
sor to the “EDIT.”
Press [CURSOR/VALUE].
The Patch Edit screen will appear.
fig.dispPtchEdtTVA.eps
Turn [CURSOR/VALUE] to select the graphic below Tone 1
“TVA,” then press [CURSOR/VALUE].
fig.disp-PatchTVAEnv.eps
The Patch TVA Envelope (T1) screen will appear.
Patch Group
1
2
13
4
5
Modifying the Sound (editing a patch)
1
2
3
SonicCell_e.book 24 ページ ２００７年８月９日 木曜日 午後９時１７分