68
Using the SonicCell in Performance Mode
1.
Press [MIDI INST] so its indicator is lit.
The MIDI INST screen will appear.
2.
Move the cursor to the part that you want to edit, and
press [PART VIEW].
The [PART VIEW] indicator will light, and the Part View
screen will appear.
3.
Turn [CURSOR/VALUE] to select “PART,” and press
[CURSOR/VALUE].
The Part Edit screen will appear.
fig.disp-PartEdit01
4.
Turn [CURSOR/VALUE] to select the parameter that you
want to edit, and press [CURSOR/VALUE].
The value of the selected parameter will be highlighted.
If you select “Scale Tune,” an editing screen will appear.
5.
Turn [CURSOR/VALUE] to edit the value, then press
[CURSOR/VALUE].
■
Menu screen.................................................................................................................
From the Part Edit screen, press [MENU] to access the
Menu screen.
The Menu screen is structured as shown in the
illustration at right. You can switch between screens by
turning [CURSOR/VALUE] to the right or left.
Press [MENU] once again to return to the Part Edit
screen.
Editing parts (Part Edit screen)
Parameter
Explanation
1–16
Changes the current part and returns to the Part Edit screen.
SND (Sound Mode)
Lets you switch between Performance mode and Patch mode.
Press [CURSOR/VALUE] to access the Sound Mode screen (p. 60).
GEN (General)
Specifies the recommended tempo of the performance.
Press [CURSOR/VALUE] to access the Performance General screen (p. 60).
MIDI (MIDI Filter)
Turns reception of various MIDI messages on/off for each part.
Press [CURSOR/VALUE] to access the Perform MIDI Filter screen (p. 60).
CINI
(Sound Control Initialize)
Initializes the values of only the following sound-related parameters for the current performance (p.
73).
• Cutoff Offset, Resonance Offset, Attack Offset, Release Offset, Decay Offset, Vibrato Rate,
Vibrato Depth, Vibrato Delay
PINI
(Performance Initialize)
Initializes the settings of the current performance (p. 73).
Write
(Performance Write)
Saves the current performance as user data.
Press [CURSOR/VALUE] to access the Performance Name screen (p. 73).
System
Press [CURSOR/VALUE] to access the System screen (p. 176).
Utility
Press [CURSOR/VALUE] to access the Utility screen (p. 182).
Demo Play
When you press [CURSOR/VALUE], the demo song list will appear.
* For details on how to play the demo songs, refer to p. 15 and p. 168.
SRX Info
(SRX Information)
Press [CURSOR/VALUE] to access the System SRX Info screen (p. 180).
Version
(Version Information)
Press [CURSOR/VALUE] to access the System Version Info screen (p. 180).
SonicCell_e.book 68 ページ ２００７年８月９日 木曜日 午後９時１７分
To Next Page
Loading...
Need help?
General
