Roland SonicCell User Manual

128
Using the SonicCell in Patch Mode
■ Rhythm TVA Env screen ................................................................................................
Parameter
Value Explanation
A-Env T1 V-Sens
(TVA Envelope Time 1 Velocity
Sensitivity)
-63–+63
This allows keyboard dynamics to affect the Time 1 of the TVA envelope. If
you want Time 1 to be speeded up for strongly played notes, set this param-
eter to a positive (+) value. If you want it to be slowed down, set this to a
negative (-) value.
A-Env T4 V-Sens
(TVA Envelope Time 4 Velocity
Sensitivity)
-63–+63
The parameter to use when you want key release speed to control the Time
4 value of the TVA envelope. If you want Time 4 to be speeded up for quick-
ly released notes, set this parameter to a positive (+) value. If you want it to
be slowed down, set this to a negative (-) value.
A-Env Time1–4
(TVA Envelope Time 1–4)
0–127
Specify the TVA envelope times (Time 1– Time 4). Higher settings will length-
en the time until the next volume level is reached. (For example, Time 2 is
the time over which Level 1 will change to Level 2.)
A-Env Level1–3
(TVA Envelope Level 1–3)
0–127
Specify the TVA envelope levels (Level 1–Level 3). These settings specify how
the volume will change at each point, relative to the standard volume (the
Tone Level value specified in the TVA screen).
T1 T2 T3 T4
L3
L1
L2
Note off
Level
Time
Note on
T: Time L: Level
SonicCell_e.book 128 ページ ２００７年８月９日 木曜日 午後９時１７分

Roland SonicCell Specifications

General

Brand	Roland
Model	SonicCell
Category	Computer Hardware
Language	English