191
Error Messages
If an incorrect operation is performed, or if processing could not be performed as you specified, an error message will appear. Refer
to the explanation for the error message that appears, and take the appropriate action.
Message
Meaning Action
USB Memory Not Ready!
USB memory is not connected.
Connect USB memory.
Read Error!
Failed to load data from USB memory.
Make sure that USB memory is correctly connected.
It may be that the file is damaged. Do not use this file.
This file cannot be loaded since its format is
incorrect.
Do not use this file.
Write Error!
Failed to write data to USB memory.
Make sure that USB memory is correctly connected.
Data cannot be written because the USB
memory has no more free space.
Delete unneeded files from the USB memory. Alter-
natively, use a different USB memory device, one
that has more free space available.
The file or the USB memory itself is write pro-
tected.
Make sure that the file or the USB memory is not
write protected.
Incorrect File/
Sampling Rate.
This is a file that the SonicCell is unable to
play.
Do not use this file.
This song has not been transferred from Play-
list Editor to USB memory.
Select the song for transfer from Playlist Editor, and
transfer the data once again to USB memory.
The sampling rate of the song does not match
the setting of the SonicCell.
Set the sampling rate of the SonicCell to match the
sampling rate of the song, and then restart it.
System Memory Damaged!
It is possible that the contents of system mem-
ory have been damaged.
Please execute a Factory Reset.
If this does not resolve the problem, contact your
dealer or a nearby Roland service center.
File Not Found!
The file was not found in USB memory.
Save the file once again in USB memory.
Checksum Error!
The checksum value of the received system ex-
clusive message was incorrect.
Please correct the checksum value.
MIDI Buffer Full!
An unusually large amount of MIDI data was
received, and could not be processed.
Reduce the amount of MIDI messages that are be-
ing transmitted.
MIDI Offline!
The MIDI IN connection was broken.
Check that there is no problem with the MIDI cable
connected to the SonicCell’s MIDI IN, and that the
MIDI cable was not disconnected.
USB Offline!
The USB cable is not connected.
Check that there is no problem with the USB cable
connected to the SonicCell, and that the USB cable
was not disconnected.
Now Playing!
The SMF/Audio File Player is currently
playing.
Either stop playback, or wait until playback has
ended.
SonicCell_e.book 191 ページ ２００７年８月９日 木曜日 午後９時１７分
To Next Page
Loading...
Need help?
General
