Roland SonicCell User Manual

151
Using the plug-in version
of SonicCell Editor
This chapter explains how to use the plug-in version of SonicCell Editor as a plug-in module in your VSTi or AU compatible host
application.
The plug-in version of SonicCell Editor is a plug-in module that lets you edit the SonicCell’s parameters from within your host
application. The results of your editing can be saved in a project file of your host application.
• In Performance mode, part ‘n’ of the SonicCell will normally be MIDI channel ‘n’.
• In Patch mode, the SonicCell’s MIDI channel will normally be 1.
• If you’ve changed the MIDI channel setting, please substitute the actual channel for any MIDI channel appearing in this
explanation.
• Functionality may be limited depending on the host application you’re using. For details, refer to the owner’s manual of your
host application.
• You can’t use the stand-alone version and plug-in version of SonicCell Editor at the same time.
• The SonicCell Editor plug-in version cannot be plugged into multiple tracks of the same project at the same time.
• The SonicCell Editor plug-in version cannot be plugged into multiple projects at the same time.
Connection example
To Monitor Amplifier etc.
MIDI Keyboad
To USB connector
of your computer
MIDI IN
OUT PUT
USB
COMPUTER
MIDI OUT
USB Cable
Computer
SonicCell_e.book 151 ページ ２００７年８月９日 木曜日 午後９時１７分

Roland SonicCell Specifications

General

Brand	Roland
Model	SonicCell
Category	Computer Hardware
Language	English